How To Print My Patterns

This is a question I am asked over and over. So I thought I would clarify some easy steps you can take to make sure that the pattern you print at home is as accurate as possible.

All of my patterns have an inch line or box. When you print out your pattern, check against this box for accuracy. Use a ruler or a professional standard tape measure. Both patterns in these images are accurate.

But what if your inch line or box isn't accurate? Please do remember that all printers / copiers have different options and menus. It's likely that your own printer wont look exactly like mine does here. These images are to guide you and give you a general idea of what to look out for:

This is my print option screen. Where it lists "Page Scaling" the option selected is NONE. This is correct and this is what we want. It means that the document will print as is without any automatic (and usually helpful) re-sizing.

In the snap below, the printer has automatically selected "Shrink to Printable Area". Again, this is usually helpful, but is not wanted when printing patterns. In this instance, you would select "none" as the option (just like the snap above).

In the snap below, the printer has selected "Fit to Printable Area". Again, this is usually helpful, but is not wanted when printing patterns. In this instance, you would select "none" as the option (just like the snap above).

It's quite common for printers to automatically re-size PDF documents. You may not have even noticed this feature. With my patterns, the work is always within the margins of A4 paper, so you don't need to think about whether the pattern will fit the page. It always will.

Make sure your printer is not adjusting your print out and also take a moment to look at the margins of the printable area, as in the snap below. Sometimes they can set themselves to half a page or 80% for no apparent reason. In this snap below, everything is fine and the pattern printed perfectly.

So, to sum up: 

All patterns are set to print to A4 for easy home printing

Make sure that your printer is set to print to 100%
If your print preview shows that you are set to print at 95%, make sure the default "shrink to printable area" box is not checked. If it is, uncheck it.

Make sure your printer does not ‘re-scale– PDF documents prior to printing.

For all ‘re-scaling’ options, select none 

For all ‘shrink to printable area’ options, ensure this is not set

Check that the "Inch Square" I add to each pattern actually measures an inch when you print it out. This ensures that you are printing the pattern at the correct size. If you do not print accurately, measure the difference and adjust your pattern accordingly.


I hope this clarifies any printing issues, now let's get back to doing what we do best....creating!    

Peaceful Pathways: Part 2 is launched

Peaceful Pathways: Roads and valleys that run up, down and over, wind and turn. Of course, there are endings, sharp corners and crossroads.

How is everyone faring with Peaceful Pathways so far? I’ve seen many beautifully embroidered text blocks by machine and hand and I'm looking forward to seeing what you all get up to this month.

With the 4 centre square blocks completed, I’m already thinking about the kind of quilting that would work on the pathways. I’m considering white quilted feathers at this stage.

If you are making Peaceful Pathways, do consider joining my Yahoo BOM Group. Membership is and always will be free. It’s a great place to discuss the pattern, share ideas and post photos of your progress.

My patterns are only available via my website or yahoo group only

WOW: GoBaby Brights Quilt

WOW = WIPs On Wednesday

Yes, I've been working on my GOBaby Quilt again



I’m thinking about a border of half square triangles – done the fast and easy way of course.

I love it. I’ve already got plans for the next top and a few projects too. I didn’t think I’d be this excited about a cutting tool, but I have been pleasantly surprised.

It’s Tomorrow, Today

Update: 10:55am

Yes, I am using fusible throughout. That way I can simply iron into place. I plan to satin or buttonhole stitch afterwards.

I am still considering my options - because fusible is too expensive to use as freely as I want. I have so many plans. I'm thinking about glues like liquid stitch? But since it's not readily available where I am, I am thinking this through.

With fusible, even with the added cost, I still feel the advantages outweigh the cost. I am really still experimenting and deciding as I go. I will keep you posted. Working with this easy cutter is still new to me.

So if you have any thoughts, please share them, I'd love to know.

Oops, I forgot to post my GOBaby progress. Where was I? Oh yes, here we are

As I mentioned in my previous post, going straight into arrangement without cutting is a lot of fun and I’ve been playing around with brights. I have some projects – a bit different to what I normally do, that I’ve been meaning to make for some time. But you know how it is. With so many WIPs on the go, I never find the time. And to be frank, I haven’t been motivated to organise and cut…for the sake of experimenting.

Until now...

Still going ... will update again
tomorrow for WOW

Thank You Wyndham Quilters

Well, I had a lovely time on Saturday, guest speaking at the Quilt In. Being a Guest Speaker is really such an honor and something I enjoy so much. Sometimes when talking about your quilts (or looking through them) do you sometimes surprise yourself?

I do. I forget sometimes how many quilts I’ve made. It doesn’t feel like it as you work through each quilt, but after a few years (I’ve been quilting for 11) it starts to add up.

As per the theme, I wore black and white and my something bright was my lipstick.

Come and See Me Today

I've got my black and white...still sorting out the little bit bright part.

I have 10 minutes before I leave, so I'm thinking fast!

If you can, do visit the Wyndham Quilt In,

it's going to be a great day!

AccuQuilt GoBaby

I’ve heard a lot about GoBaby and no doubt, you have too. I’ve been wanting to try one out myself for a while now, so I was really happy to receive this machine from AccuQuilt last week in order to do just that.

If you’re anything like me, you have a lot of beautiful fabric you want to put to use. The idea of quick cutting really appeals to me. And I have to say, the GoBaby does not disappoint.

Yesterday I pulled some brights from my stash and started playing. How easy is it?

Prepare the fabric

I cut several layers at a time

And put the plastic cover on and roll it through

As I'm rolling these through,

I'm daydreaming about how wonderful it would be

if all applique were this easily cut...

The result is perfectly cut shapes

I keep the cut away fabric, I like these ‘negative’; stamped cuttings, I know I will use them to great effect somewhere, possibly a border.

When I ordered the bird, daisy and feather dies, I knew straight away that I wanted to applique brights on a plain white background – I want a fresh and vibrant feeling quilt.

This is not my usual kind of quilt - and that's what I was after. Something that allows me to experiment more than usual. I have a lot of tools that, honestly, I don't get much use out of.

It's always a dilemna when I find new interestings things. Will I use it? Will I really use it?

I can see so many possibilities with this tool

Something a little whimsy. Something to have fun puzzling together, because this is how it feels, with the cutting done you are simply putting what you want, where you want.

This is my progress in one afternoon….

Today I will iron down my designs and show you what I got up to, tomorrow

In the meantime, why not take advantage of Accuquilts current free offer?

Click below to find out more